HamGeek Zynq7020 + AD9361/AD9363 SDR Development Board for Openwifi Neptune ADI Pluto SDR
Nie można załadować gotowości do odbioru
Zynq7020+AD9361 P210 SDR Development Board
HamGeek P210 SDR Development Board:
New Upgrades:
- TCXO: 0.5ppm high accuracy
- High performance power supply for Texas Instruments
- Type-C interface
Features:
- HAMGEEK P210 is a completely upgraded SDR
- Supports for ZED-FMCOMMS2-3/Openwifi/Pluto SDR
- Supports host computer development (for official host computer/Matlab/GUN Raido, etc.)
- ZYNQ-XC7Z020-CLG400i + AD9361 + 2r2t
- With a Gigabit Ethernet port
- 512M DDR3
- Plug and play. Supports secondary development
- FPGA model: xc7z020-clg400
- RF chip model: AD9361
- Memory capacity: 512MB 16bit
- Supports Gigabit Ethernet port and ZED+FMCOMMS2-3 routine
- Supports for Plutosdr routine, and supports 2r2t
- Lower price. The radio signal transmission and reception performance is better than that of Plutosdr
- FPGA resources are three times larger than those of Plutosdr. It also incorporates more complex baseband algorithms
- Equipped with Gigabit Ethernet interface. Sampling bandwidth can reach 10mps (Plutosdr 5mps)
- Supported host computers: For SDR#, MATLAB, GNU Radio and SDRWIN and other SDR software and official test software for ADI
- At present, HamGeek has ported the software and HDL corresponding to fmcomms2, fmcomms3, 2r2t, Openwifi, Pluto SDR, adrv9364 and other hardware. This means that you can seamlessly integrate the tutorials of the above official hardware and the projects that require the above hardware. This is a cost-effective solution for the AD9361. You can use the official host computer as well as MATLAB and GNU Radio to do your own host computer development
Specifications:
- RFIC: For ADI AD9361 2r2t, 2X2 MIMO. Frequency: 70M~6G (AD9361). 20M instantaneous bandwidth (AD9361)
- Baseband processing: ZYNQ7020, 512MBYTE DDR3; 256MBit QSPI
- Interface: RJ45 GIGA ETH, one-way SD card slot, and USB TYPE-C CONSEL
- Clock: Initial accuracy is 0.5ppm. VCTCXO dynamically adjusts the clock via digital PLL. The accuracy can be better than +/-5ppb
- API: ADI11O (pre-installed in the factory), C/C++ and PYTHON
- Size: 76mm x 100mm/3" x 3.9"
- Power supply: USB TYPE-C powered
Supports SDR Kits for More Applications:
HAMGEEK is committed to providing users with a more professional and versatile SDR platform. And we have made the following efforts, and there will be more projects and software support in the future.
Firmware Migration:
1. For PlutoSDR and ZED+FMCCOMS
Open Source Project Support (the following are official community support):
1. For openwifi
2. For gps_sdr_sim
Software Support:
1. For GNURadio
2. For SDR#
3. For SDRangel
4. For Matlab Simulink
5. For Gqrx SDR
6. For STASAGEN
Package Included:
- 1 x HamGeek P210 Board
- 1 x USB Type-C Data Cable
- 1 x Network Cable
- 2 x Rubber Antennas (2.4G-5.8G)
- 1 x Telescopic Antenna (FM)
- 1 x SMA RF Coaxial Cable
- 1 x 32GB High-speed TF Card
Packaging Details:
- Weight: 0.5kg
___________________________________________________________________________________________________
HamGeek K210 SDR Development Board:
New Upgrades:
- TCXO: 0.5ppm high accuracy
- High performance power supply for Texas Instruments
- Type-C interface
Features:
- HamGeek K210 is a completely upgraded SDR development board
- Supports for ZED-FMCOMMS2-3/Openwifi/Pluto SDR
- Supports host computer development (for official host computer/Matlab/GUN Raido, etc.)
- ZYNQ-XC7Z020-CLG400i + AD9361 + 2r2t
- 1G 2DDR3
- Plug and play. Supports secondary development
- Supports Gigabit Ethernet port and ZED+FMCOMMS2-3 routine
- Supports for Plutosdr routine, and supports 2r2t
- Lower price. The radio signal transmission and reception performance is better than that of Plutosdr
- UHD firmware migration: higher bandwidth and more applications than Pluto
- FPGA resources are three times larger than those of Plutosdr. It also incorporates more complex baseband algorithms
- Equipped with Gigabit Ethernet interface. Sampling bandwidth can reach 10mps (Plutosdr 5mps)
- Supported host computers: For SDR#, MATLAB, GNU Radio and SDRWIN and other SDR software and official test software for ADI
- At present, HamGeek has ported the software and HDL corresponding to fmcomms2, fmcomms3, 2r2t, Openwifi, Pluto SDR, adrv9364 and other hardware. This means that you can seamlessly integrate the tutorials of the above official hardware and the projects that require the above hardware. This is a cost-effective solution for the AD9361. You can use the official host computer as well as MATLAB and GNU Radio to do your own host computer development
Specifications:
- RFIC: For ADI AD9361 2r2t, 2X2 MIMO. Frequency: 70M~6G (AD9361). Up to 56M instantaneous bandwidth (AD9361)
- Baseband processing: ZYNQ7020, 1GBYTE 2DDR3; 256MBit QSPI
- Interface: RJ45 GIGA ETH, one-way SD card slot, USB TYPE-C CONSEL and GPIO expansion
- Clock: Initial accuracy is 0.5ppm. VCTCXO dynamically adjusts the clock via digital PLL. The accuracy can be better than +/-5ppb
- API: USRP, UHD, ADI11O (pre-installed in the factory), C/C++ and PYTHON
- Size: 85mm x 55mm/3.4" x 2.2"
- Power supply: USB TYPE-C powered
Supports SDR Kits for More Applications:
HamGeek is committed to providing users with a more professional and versatile SDR platform. And we have made the following efforts, and there will be more projects and software support in the future.
Firmware Migration:
1. For PlutoSDR and ZED+FMCCOMS
2. UHD: Compared to Pluto, firmware migration in UHD offers higher bandwidth and more applications.
Open Source Project Support (the following are official community support):
1. For openwifi
2. For gps_sdr_sim
Software Support:
1. For GNURadio
2. For SDR#
3. For SDRangel
4. For Matlab Simulink
5. For Gqrx SDR
6. For STASAGEN
Package Included:
- 1 x HamGeek K210 Board
- 1 x USB Type-C Data Cable
- 1 x Network Cable
- 2 x Rubber Antennas (2.4G-5.8G)
- 1 x Telescopic Antenna (FM)
- 1 x SMA RF Coaxial Cable
- 1 x 32GB High-speed TF Card
Packaging Details:
- Weight: 0.5kg
____________________________________________________________________________________________________________________
HamGeek R210 SDR Development Board:
New Upgrades:
- TCXO: 0.5ppm high accuracy
- High performance power supply for Texas Instruments
- Type-C interface
Features:
- HAMGEEK R210 is a completely upgraded SDR
- Supports for ZED-FMCOMMS2-3/Openwifi/Pluto SDR
- Supports host computer development (for official host computer/Matlab/GUN Raido, etc.)
- ZYNQ-XC7Z020-CLG400i + AD9363 + 2r2t
- With a Gigabit Ethernet port
- 512M DDR3
- Plug and play. Supports secondary development
- FPGA model: xc7z020-clg400
- RF chip model: AD9363
- Memory capacity: 512MB 16bit
- Supports Gigabit Ethernet port and ZED+FMCOMMS2-3 routine
- Supports for Plutosdr routine, and supports 2r2t
- Lower price. The radio signal transmission and reception performance is better than that of Plutosdr
- FPGA resources are three times larger than those of Plutosdr. It also incorporates more complex baseband algorithms
- Equipped with Gigabit Ethernet interface. Sampling bandwidth can reach 10mps (Plutosdr 5mps)
- Supported host computers: For SDR#, MATLAB, GNU Radio and SDRWIN and other SDR software and official test software for ADI
- At present, HamGeek has ported the software and HDL corresponding to fmcomms2, fmcomms3, 2r2t, Openwifi, Pluto SDR, adrv9364 and other hardware. This means that you can seamlessly integrate the tutorials of the above official hardware and the projects that require the above hardware. This is a cost-effective solution for the AD9361. You can use the official host computer as well as MATLAB and GNU Radio to do your own host computer development
Specifications:
- RFIC: For ADI AD9363 2r2t, 2X2 MIMO. Frequency: 380M~3.8G (AD9363). 20M instantaneous bandwidth (AD9363)
- Baseband processing: ZYNQ7020, 512MBYTE DDR3; 256MBit QSPI
- Interface: RJ45 GIGA ETH, one-way SD card slot, USB TYPE-C CONSEL, and GPIO expansion
- Clock: Initial accuracy is 0.5ppm. VCTCXO dynamically adjusts the clock via digital PLL. The accuracy can be better than +/-5ppb
- API: ADI11O (pre-installed in the factory), C/C++ and PYTHON
- Size: 76mm x 100mm/3" x 3.9"
- Power supply: USB TYPE-C powered
Supports SDR Kits for More Applications:
HAMGEEK is committed to providing users with a more professional and versatile SDR platform. And we have made the following efforts, and there will be more projects and software support in the future.
Firmware Migration:
1. For PlutoSDR and ZED+FMCCOMS
Open Source Project Support (the following are official community support):
1. For openwifi
2. For gps_sdr_sim
Software Support:
1. For GNURadio
2. For SDR#
3. For SDRangel
4. For Matlab Simulink
5. For Gqrx SDR
6. For STASAGEN
Package Included:
- 1 x HAMGEEK R210 Board
- 1 x USB Type-C Data Cable
- 1 x Network Cable
- 2 x Rubber Antennas (2.4G-5.8G)
- 1 x Telescopic Antenna (FM)
- 1 x SMA RF Coaxial Cable
- 1 x 32GB High-speed TF Card
Packaging Details:
- Weight: 0.5kg
____________________________________________________________________________________________________________
We accept the following forms of payment:
Credit Card (Visa, MasterCard, American Express, JCB)
PayPal
Bank Transfer (Please contact us Hamgeek@163.com for details）
Delivery and Shipping Fee
Shipping Services & Shipping Fee
Orders will be shipped by 4PX(10-20days Delivery time),if you need ship by Express shipping etc. DHL,FeDex,UPS,Please pay extra fee . Due to air transportation restrictions, package only contains battery is not accept by shipping company.
If your order does not qualify for free shipping,our service department will contact you for shipping fee details within 2 days after order placed.
Shipping Notice
For special shipping requests, please contact service department by email (HamGeek@163.com) or whatsapp. Please confirm your address before payment. If you enter the wrong address, please contact us in a timely manner. We will contact logistics personnel to solve the problem. If you ask to change the address after the order has been shipped, we cannot guarantee that your order will be updated. In addition, you are responsible for all possible risks and expenses caused by changing the address after the order has been shipped.
When you place an order, be sure to enter the correct name, address, and contact information so that we can deliver your items successfully.If you need order to be shipped by Express or the package weight is over 2kg that only can be sent by Express shipping,Please offer VAT number before order processed.
Delivery Time
Total delivery time is composed of two parts: processing time and actual shipping time.
Processing time refers to the time from when your payment is received to when we collect and pack your order. Our processing takes 1-2 working days normally. The second part is the actual shipping time. This is the time that it takes for the package to be delivered by the couriers to the major destination. All goods will be shipping via air mail.
Please make sure the Zip code and city name is correct( corresponding), otherwise the order processing will be delayed untill correct information provided.
In order to process your order quickly, we strongly recommend you to use the same address for your shipping address and billing address. Otherwise, your order will bedelayed for further verification.
Tariff or Customs Duties
All listings's price not included the tariff or customs duties as this part of fee various in different countries,if you have any requirments of decleration value, please contact us before order processed.